Correct pasting method for adhesive labels
May 29, 2023
Correct pasting method for adhesive labels from Weifang Superreliable Technology
The correct pasting method of self-adhesive labels can affect the adhesion and service life of the labels. The adhesive process of labels needs to consider various factors, including label materials, the adhesive surface on the back of the label, the material of the adhesive surface, and environmental conditions. These factors may all affect the adhesion effect of self-adhesive labels.
2. Preparation work
Before starting to apply self-adhesive labels, some preparatory work needs to be done first. This includes:
Clean the bonding surface: Ensure that the bonding surface is clean and dry. If there is oil, dust, or moisture on the surface, it may affect the stickiness of the label surface, making it difficult for the label to adhere.
Choose the appropriate label: Choose the appropriate label based on the object and environment that needs to be pasted. For example, if you need to paste a label in a low-temperature environment, you need to choose a label that is suitable for the low-temperature environment. If you need to stick labels on rough surfaces, you need to choose labels with stronger stickiness.
Trial application: Before applying a large number of labels, a trial application can be conducted to confirm the stickiness and adhesion of the labels.
3. Pasting process
When pasting labels, it is also necessary to pay attention to the following steps:
Location positioning: Determine the placement of labels as needed. If precise positioning is required, markings can be made on the bonding surface first.
Peel off the backing paper: Before pasting, it is necessary to peel off the backing paper of the label. When peeling, try to peel along the edge of the label as much as possible to avoid damaging the label.
Smooth pasting: Paste the label smoothly in the predetermined position, avoiding bubbles and wrinkles as much as possible. If the label area is large, you can start from one side and slowly slide towards the other side to reduce the generation of bubbles.
Pressurization: After pasting, the label can be evenly pressurized by hand or a hard object to make it adhere more tightly to the surface.
When pasting Qiworth Brand self-adhesive labels, it is also necessary to pay attention to the following points:
Temperature effect: Some labels have the best adhesion effect at specific temperatures. In excessively cold or overheated environments, the adhesive surface of the label may lose its adhesion. Before pasting the label, it is necessary to confirm that the ambient temperature meets the usage requirements of the label.
Time factor: Most self-adhesive labels have an increased stickiness over time, which means that the stickiness of the label gradually increases over a period of time after pasting.
Avoid contact with the adhesive surface: During the bonding process, try to avoid fingers or other objects coming into contact with the adhesive surface of the label. Because this may affect the stickiness of the label bonding surface and reduce the adhesion of the label.
Storage conditions: Unused self-adhesive labels should be stored in a dry, dark, and room temperature environment, avoiding direct sunlight and moisture to maintain the stickiness and printing effect of the labels.
Proper pasting of self-adhesive labels not only ensures the lifespan of the label, but also ensures its clarity and readability during use. Therefore, it is important to understand and master the correct pasting method of self-adhesive labels.